An SSB receiver from an Arduino/si5351 VFO/BFO

Having finished my latest Arduino Nano/si5351 VFO/BFO/Controller, I wanted to hook it up to some receiver stages to realise a SSB receiver. My grand plan for these modules is to build a multiband SSB/CW transceiver for SOTA and portable operation (another rig in my established ‘Summit Prowler’ series). The architecture will be a single conversion superhet with an IF of 12 MHz. For a base design I chose Leon VK2DOB’s MST3, a proven design which I am very familiar with, having used the MST (circa 2013) on nearly all of my SOTA activations to date.

I scratch-built two boards. The first is the MST3 product detector (SA612), audio filter (NE5534) and audio amplifier (TDA7052A). This module includes receiver muting, sidetone injection and audio-derived AGC which controls the gain of the TDA7052A. The second board contains the transmit and receive mixers (both SA612s), some SA630D RF switches to switch the bandpass filter between transmit and receive signal paths, as well as two 5-pole crystal filters (one for SSB, one for CW), each switched by another pair of SA630Ds.  There is no IF gain stage, although I put some pads on the end of this board for one or two MOSFET stages, if needed.  

As per other recent scratch building efforts these boards are a curious jumble of thru-hole and SOIC ICs, soldered to the copper side of a Muppet style hand drawn and etched board, largely populated with junk box and surplus sales components. 

Once the boards were debugged, temporarily adding a 40m bandpass filter and connecting the VFO/BFO up brought the little receiver to life. I used no si5351 clock filtering or buffering, just CLK0 and CLK2 square waves straight into the SA612 Gilbert cell active mixers, which have some useful gain.  The sound of the receiver is pleasant, to me at least.  The video includes a range of DX and local signals on 40m from my QTH in the north-eastern suburbs of Melbourne, received over a day. 

Next, I will add a third board with a bank of switched bandpass filters and switching logic, all controlled by the Arduino. More to follow.

Advertisements
Tagged ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

designerlythinking

Design thinking, enterprise architecture, systems thinking, theory and practice.

Ripples in the Ether

Emanations from Amateur Radio Station NT7S

Hackaday

Fresh hacks every day

vk2yw

A fine WordPress.com site

vk3oak

Up the Hill

VK1VIC / VK2VIC Amateur Radio Blog

Summits of the Air , World Wide Flora & Fauna activations, CW (Fists #14192), (SKCC #14993)

VK7TW

Blog of Justin Giles-Clark VK7TW's SOTA and amateur radio adventures.

vk3cat

VK3CAT Radio Communications

Andrew White ZL3CC

amateur radio in Aotearoa / New Zealand

David "Mitch" Mitchell - VK3XDM Hawthorn, VK7XDM Hobart

My worpress blog site on amateur radio, skiing and all things outdoors.

Gerbrandt van Santen

cloud computing, haiku en dagelijks leven

%d bloggers like this: