Tag Archives: amateurradio

Low-band AM Tx: Power supplies

Complete 500W variable regulated DC power supply assembly.

This post describes the power supplies for a 200 watt AM transmitter. There are four independent DC regulated supplies. The ‘high tension’ (HT) supply delivers 0 to 100 volts at 5 amps steady to the modulator, and is sized for a continuous 200 watt AM carrier (with 800 watts of peak power in the sidebands). Two regular 12 volt linear regulated supplies power the 12 volt circuitry (independent 12 volt supplies is a way of keeping digital and other noise off the modulator and driver stages).

Continue reading
Tagged , ,

Digital SWR and Power Meter

This module is an analogue and digital SWR and power meter/monitor, designed to replace analogue SWR and power metering in an AM Transmitter project. Of equal importance was the ability to detect high SWR and raise an interlock (a control line) to inhibit transmitter power in the presence of unreasonably high SWR. I make no claim to either SWR or power accuracy; my version is an indicative tool and an interesting experiment, not an accurate test equipment, although it could be made into same with some skill and patience.

Continue reading
Tagged , , ,
Shack of VK2KMI

Ham Radio Blog of VK2KMI

Ham Historian

A passionate amateur looks at Melbourne history

R.IT

My journey of repairing and recycling anything I put my hands on that I believe is still useful. Not just hardware, but including software with relevant content and issues in the field of Cyber Security, Vulnerability Scanning and Penetration Testing.

G4YDM Ham-Radio and SWL news

Radio craft, homebrew, QRP/SOTA, AM

VK1DA.blog

Amateur radio experiences with VK1DA

Tj Lab

信号処理とラジオ

The Microscopic New Yankee Make Shop

Bits of technology and illogic by WA2MZE

Paul Gacek

W6PNG/M0SNA

NewURL: https://dk7ih.de

This blog is no longer in use!