Tag Archives: CW

Something old, something new: A four-band 5W/50W SSB/CW transceiver (‘Summit Prowler 7’)

‘Summit Prowler 7’ is my name for this scratch-built multiband SSB and CW transceiver. This rig covers four of the most popular portable, Parks and SOTA bands — 80, 40, 30 and 20m, at a power level of 5 watts, but with an in-built switchable 50 watt power amplifier, so that you have the option to call up the extra power if the going gets rough. The rig weights in at around 1 kilogram or 2.2 pounds, about the same as an FT-817, and is similarly sized. It’s a rig for a wide range of portable situations, and is equally at home on the shack bench.

Continue reading
Tagged , , , , , ,

Federation Range VK3/VN-029 Jan 2020, with VK3EAR and VK3KR

Federation Range at 1490m is the highest point in the Yarra Ranges, and a comfortable 4km walk from Lake Mountain resort, 90 minutes drive north east of Melbourne. The 24th January 2020 was planned a few weeks in advance and fortunately, the weather was favourable, the area was well clear of bushfires, and Owen VK3EAR and David VK3KR were both able to join in.

Continue reading
Tagged , , , ,

Two activators, two summits in the Yarra Ranges (25/10/2019)

On the 25th October 2019 I dragged David VK3KR out to the Yarra Ranges for some SOTA fun. The story is told by the video. Thanks to all chasers!

Tagged , , , , , , ,

Arduino CW keyer for a BiTx or other homebrew rig

It’s been 3 years since I got my MST400 Mk 1 40 meter SSB transceiver going and started using it for SOTA activations. For those not familiar with it, it’s like a kit version of the BiTx40 from 2013. It has a similarly spec’d monoband superhet receiver, 10MHz IF, and IRF510 5 watt power stage. The circuit on a page is here. It’s been with me for nearly all of my 65 activations (over 400 SOTA activation points) around VK3. Now, with HF propagation approaching cycle lows, it is time to do what I should have done ages ago… add CW.

Continue reading

Tagged , , , , , ,

Homebrew 160 meter AM/CW transmitter receiver

The VK 160 and AM SOTA event (1st April 2017) provided the deadline pressure needed to complete this build. The rig is a separate transmitter and receiver, so seeing as there are no shared modules, I shall call it a trans-receiver rather than transceiver. The designs for both transmitter and receiver are by Drew Diamond VK3XU. See Drew’s Projects Volume 3 book for full details, available from the WIA or RSGB. I posted details of the 160m AM receiver when I first built it, a year ago. At that time I also built the transmitter and power supply. I got the transmitter going but blew up the PA FET (BUZ90). During the long wait for replacements, I shelved the build and moved onto something else. Now, thanks to SOTA, it is finished.

Continue reading

Tagged , , ,
Shack of VK2KMI

Ham Radio Blog of VK2KMI

Ham Historian

A passionate amateur looks at Melbourne history


My journey of repairing and recycling anything I put my hands on that I believe is still useful. Not just hardware, but including software with relevant content and issues in the field of Cyber Security, Vulnerability Scanning and Penetration Testing.

Amateur radio with VK1DA

Amateur Radio, Computing and other activities of Andrew VK1DA/VK2UH

G4YDM Ham-Radio and SWL news

Radio craft, homebrew, QRP/SOTA, AM


Radio craft, homebrew, QRP/SOTA, AM

VK1DA on the net

Amateur radio experiences with VK1DA

Tj Lab



Amateur Radio and unrelated technologies

Paul Gacek