Tag Archives: hamradio

AGC for a Termination Insensitive Amplifier

For AGC controlled IF stages in receivers I have often chosen a 2 or 3 stage dual gate MOSFET strip, or a cascode arrangement with a bipolar and JFET pair.  These work well, have more than enough overall gain, and provide good AGC-controlled gain range.    I’ve also built a BiTX style transceiver (Andy G6LBQ’s design) with two Termination Insensitive Amplifier blocks. TIAs exhibit stable input and output impedance regardless of load, and work symmetrically (for receive and transmit) but are fixed gain. My BiTx receiver worked acceptably on 40m but was underpowered on 20m. Increasing the gain to make it more lively on 20m would have made it over-powered on 40m. You don’t have this problem when you have an AGC controlled IF.

Continue reading
Tagged , ,

Digital SWR and Power Meter

This module is an analogue and digital SWR and power meter/monitor, designed to replace analogue SWR and power metering in an AM Transmitter project. Of equal importance was the ability to detect high SWR and raise an interlock (a control line) to inhibit transmitter power in the presence of unreasonably high SWR. I make no claim to either SWR or power accuracy; my version is an indicative tool and an interesting experiment, not an accurate test equipment, although it could be made into same with some skill and patience.

Continue reading
Tagged , , ,
Shack of VK2KMI

Ham Radio Blog of VK2KMI

Ham Historian

A passionate amateur looks at Melbourne history

R.IT

My journey of repairing and recycling anything I put my hands on that I believe is still useful. Not just hardware, but including software with relevant content and issues in the field of Cyber Security, Vulnerability Scanning and Penetration Testing.

G4YDM Ham-Radio and SWL news

Radio craft, homebrew, QRP/SOTA, AM

VK3HN

Radio craft, homebrew, QRP/SOTA, AM

VK1DA.blog

Amateur radio experiences with VK1DA

Tj Lab

信号処理とラジオ

WA2MZE

Amateur Radio and unrelated technologies

Paul Gacek

W6PNG/M0SNA