Tag Archives: soldersmoke

200 watt Class D and Pulse Width Modulated AM Transmitter

This post wraps up a series describing the construction of a 200W Class D AM transmitter for 160m, built, tested and put on air over 6 months from August 2019. The transmitter consists of a digital PLL VFO and driver circuit, an Arduino controller, a microphone amplifier, a Pulse Width Modulator, two H-bridge Class D RF modules each capable of at least 100 watts of carrier, an RF power combiner, Low Pass Filter, a 300W power supply and a switching regulator. At the Australian legal limit of 120W carrier, all parts of the transmitter run cool due the use of switching designs. Previous posts describe the switching regulator, 300 watt DC power supply and dummy loads for this project.

Continue reading
Tagged , , , , , ,
Shack of VK2KMI

Ham Radio Blog of VK2KMI

Ham Historian

A passionate amateur looks at Melbourne history


My journey of repairing and recycling anything I put my hands on that I believe is still useful. Not just hardware, but including software with relevant content and issues in the field of Cyber Security, Vulnerability Scanning and Penetration Testing.

Amateur radio with VK1DA

Amateur Radio, Computing and other activities of Andrew VK1DA/VK2UH

G4YDM Ham-Radio and SWL news

Radio craft, homebrew, QRP/SOTA, AM


Radio craft, homebrew, QRP/SOTA, AM

VK1DA on the net

Amateur radio experiences with VK1DA

Tj Lab



Amateur Radio and unrelated technologies

Paul Gacek